Table of Contents
Advertisement
M
Press the 0 or 1 keys to turn this
function on or off.
Note
You can choose to only lock
messages from Specified Send-
ers, or lock all messages except
those from Specified Senders.
Adjust this setting with the User
Parameters.
N
Press [OK].
O
Press [PrevMenu] twice.
P
Press [Exit].
Note
The standby display reappears.
TX/RX File In HD
(Having Messages from Certain Senders Stored in Memory)
This function requires the optional Func-
tion Upgrade Card and optional 40M Ex-
panded Memory Card.
Use this function to have messages
from Specified Senders received us-
ing the TX/RX File In HD function. If
you do not register any Specified
Senders, all messages will be received
using the TX/RX File In HD func-
tion.⇒ P.146 "TX/RX File Save"
You can register the following items:
• Specified Senders (maximum 30
items, each G3 item can be up to 20
characters long, each G4 item can
be up to 24 characters long)
• Wildcards
Note
You can choose to forward only
messages from Specified Senders,
or forward all messages except
those from Specified Senders. Ad-
just this setting with the User Pa-
rameters.
When
default setting is "Only Apply To
Messages From Specified Send-
ers".
You can edit these settings using
the same procedure as used for
registering them.
Setting up TX/RX File In HD
Reference
For how to delete Specified Send-
ers, see P.282 "Deleting Specified
Senders".
For how to print a list of Specified
Senders, see P.283 "Printing the
Specified Sender List".
A
Follow steps A–D on "Opening the
Initial Set Up Menu" ⇒ ⇒ P.260. to
bring up the "Initial Set Up"
menu.
Initial Set Up
shipped,
the
279
9
Advertisement
Table of Contents
