Table of Contents
Advertisement
Key Operator Tools
same size as that loaded in the
Main Paper Tray. When two Paper
Supply Units are installed, load the
Main Paper Tray with paper of the
same width as the widest of the pa-
per sizes loaded in the Paper Sup-
ply Units.
If you do not set paper in the way
outlined above, Substitute Recep-
tion may take place even if paper is
set.
You can edit these settings using
the same procedure as used for
registering them.
Setting up Specified Tray
Reference
For how to delete Specified Send-
ers, see P.282 "Deleting Specified
Senders".
A
Follow steps A–D on "Opening the
Initial Set Up Menu" ⇒ ⇒ P.260. to
bring up the "Initial Set Up"
menu.
B
Enter the code for "Specified
Tray" with the number keys.
9
Note
If the item you require is not
shown, press [↑Prev.] or [↓Next]
until it is.
266
C
Press [Sender].
Note
If you do not wish to register a
Specified Sender, proceed to
step M.
D
Enter the code for "Program
Sender" with the number keys.
Note
If you do not register any Speci-
fied Senders, all incoming faxes
will be printed on different pa-
per.
E
Enter the 2-digit code of the Spec-
ified Sender you wish to register
with the number keys.
Note
If you make a mistake, press the
{ Clear} key and try again.
Advertisement
Table of Contents
