Table of Contents
Advertisement
L
Press [OK].
Note
Press 0 or 1 to switch between
destinations. To edit a destina-
tion, make sure the destination
is displayed, then press the
{Clear} key. When a destination
was entered on the number
keys, fax number digits are de-
leted one at a time. When the
destination was entered using a
Quick Dial or Speed Dial, press-
ing the {Clear} key once erases
the whole destination.
If you press [Cancel], the Group
will not be registered and the
display shown in step F will re-
appear.
M
Press [PrevMenu] three times.
N
Press [Exit] to return to standby
mode.
Multi-step Transfer Group settings
This procedure describes how to store
a transfer station in a Group. Once set
up, this machine can then forward in-
coming transfer requests that specify
this Group onto the stored transfer
station. The destination stored in the
Group becomes the receiving station
(in this case, store 30 or less items in
the Group). Messages sent via multi-
ple transfer stations further enhance
the efficiency of the Transfer Request
feature.
Note
For more details, please contact
your service representative.
A
Make sure that the machine is in
standby mode.
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the {User Tools} key.
C
Enter the code for "Fax Features"
with the number keys.
D
Enter the code for "Program/De-
lete" with the number keys.
Program/Delete Menu
189
8
Advertisement
Table of Contents
