Table of Contents
Advertisement
Sending a Fax Message
Note
If the CIL is added, the following
information is printed on all pages:
• The receiver's own number and
ID
• The sender's (i.e. this machine's)
own number and ID
2
• The communication time
• Page number
By default, TTI/CIL Print is turned
on when the machine is shipped.
For how to change this setting,
seeP.236 "Changing the User Param-
eters".
ID Transmission
If you use this feature, transmission is
limited to destination machines of the
same make and with the same stored
Polling ID. This is useful when send-
ing documents containing confiden-
tial or sensitive information.
Preparation
You need to program the Polling
ID beforehand.⇒ P.250 "Register-
ing ID Codes"
Limitation
ID Transmission is not available
with the following functions:
• Polling Transmission (⇒ P.120)
• Backup Transmission (⇒ P.85)
Note
When the machine is shipped, this
feature is turned off by default.
Turn in on or off with the User Pa-
rameters.
84
Skip Transmission
This feature requires the optional Func-
tion Upgrade Card.
By storing the scan area beforehand,
only the designated area of the docu-
ment page will be scanned and sent.
Transmitter
(This machine)
Preparation
You need to store the Skip Trans-
mission feature in a User Function
key beforehand.
Limitation
You can only store one scan area.
Skip Transmission is not available
with the following features:
• Immediate Transmission (⇒
P.55)
• On Hook Dial Transmission (⇒
P.59)
• Manual Dial Transmission (⇒
P.61)
• Parallel Memory Transmission
(⇒ P.49)
Note
Transmission time is shorter com-
pared to sending the whole page.
This feature is useful, for example,
when you do not need to send the
whole page, or when the page con-
tains confidential information.
Receiver
GFSKPS0N
Advertisement
Table of Contents
