Table of Contents
Advertisement
Note
You can choose to only lock mes-
sages from Specified Senders, or
lock all messages except those
from Specified Senders. Adjust
this setting with the User Parame-
ters. When shipped, the default
setting is "Only Lock Messages
From Specified Senders".⇒ P.236
"Changing the User Parameters"
You can edit these settings using
the same procedure as used for
registering them.
Setting up Memory Lock
Reference
For how to delete Specified Send-
ers, see P.282 "Deleting Specified
Senders".
For how to print a list of Specified
Senders, see P.283 "Printing the
Specified Sender List".
A
Follow steps A–D on "Opening the
Initial Set Up Menu" ⇒ ⇒ P.260. to
bring up the "Initial Set Up"
menu.
B
Enter the code for "Memory
Lock" with the number keys.
Note
If the item you require is not
shown, press [↑Prev.] or [↓Next]
until it is.
C
Press [Sender]
Note
If you do not wish to register a
Specified Sender, proceed to
step M.
D
Enter the code for "Program
Sender" with the number keys.
Note
If you do not register any Speci-
fied Senders, all incoming faxes
will locked in memory.
E
Enter the 2-digit code of the Spec-
ified Sender you wish to register
with the number keys.
Note
If you make a mistake, press the
{Clear} key and try again.
Initial Set Up
9
277
Advertisement
Table of Contents
