Table of Contents
Advertisement
Key Operator Tools
When the CSI is received, it is
shown on the display or printed on
reports on the receiver's or send-
er's machine. The CSI works even
if the receiver or sender uses a dif-
ferent make machine. The CSI can
be up to 20 characters long and
contain a plus sign (+), numbers
and spaces. Register your country
code, area code (minus the leading
zero) and your fax number in that
order.
Note
The CSI feature is not available in
some countries.
When using sending to Transfer
Stations or machines set up with
Transfer Boxes, you need to regis-
ter the CSI with your own analog
number (the telephone number to
which your machine is connected)
so that the transfer station can re-
turn the Transfer Result report to
you. Be sure to enter a pause after
the area code.
A
Make sure that the machine is in
standby mode.
9
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
B
Press the [User Tools] key.
244
C
Enter the code for "Key Op.
Tools" with the number keys.
Then press the {#} key.
The "Fax Features" menu appears.
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "G3-1 Analog
Line" with the number keys.
F
Enter the code for "PSTN Line
Type" with the number keys.
G
Select your line type with the ar-
row keys then press [OK].
H
Enter the code for "CSI" with the
number keys.
Advertisement
Table of Contents
