Table of Contents
Advertisement
TAD (Telephone Answering Device) Mode
Note: TAD mode is not available is France.
Use this mode if you have a telephone answering device connected.
1
When someone calls your number, the machine rings a few times to give
you the opportunity to answer it yourself. You can change the number of
rings (see page 101, Ring Count).
2
If you do not pick up the phone before machine stops ringing, the answer-
ing device takes the call (it plays a recorded message then starts record-
ing). The fax machine listens in at the same time.
3
If the fax machine hears a fax machine identification signal from the other
end, it switches to Fax mode automatically for this call. It then immediately
takes the line over from the answering device and receives the fax mes-
sage.
TAD Interface
The TAD ring count, the number of rings at which the fax function of this ma-
chine is activated, must be at least one more than the answering ring count of
the telephone answering device. For example, when the telephone answering
device is set to ring once, the TAD ring count must be set to two rings or more.
When this machine receives a call and the fax function has been activated, the
machine starts to monitor the call for the period of time specified here whether
it is a telephone or fascimile transmission.
1
Press the Function key and 5,1 using
the Ten Key Pad.
2
Press the Yes key.
3
Set the TAD ring count (1-9) using the *
key . Then press the Yes key.
4
Set the waiting time using the * key. It is
adjustable between 5 and 30 seconds
in 5 second steps.
Then press the Yes key.
Note:
If the machine is in TAD mode, you can change to FAX mode by
pressing "9" on your external telephone
RECEIVING FAX MESSAGES
5($'<
6(7 7$' ,)" <1
7$' 5,1*
021,725 6(&
<
<
29
Advertisement
Chapters
Table of Contents
