Table of Contents
Advertisement
Handy Functions
Energy Saver Mode
Energy Saver mode is a power saving feature.
When not used for 5 minutes, the machine reduces its electricity consumption to
the bare minimum.
• There are two kinds of Energy Saver mode, and you can choose which takes
priority:
• Fax StandbyUse if you frequently receive incoming faxes
• Low Power StandbyUse to minimize power consumption
Energy Saver
Machine Sta-
Mode
tus
Low Power
Display is
Standby
blank, power to
heater is off
Fax Standby
Display is
blank, power to
heater is low
*1
It is possible to combine High Temperature Standby mode with either Low Power
Standby mode or Fax Standby mode. If you turn High Temperature Standby on,
15 minutes after entering Energy Saver mode the heater power is not turned off.
*2
Values for when no options are installed.
*3
2.4W when the optional G4 unit is installed, 2.4W when the optional G3 unit is in-
stalled, 6.0W when the optional NIC FAX Kit is installed, 13W or 16W (with NIC
FAX Kit) when the optional printer interface is installed.
• Documents already stored in memory will still be sent, and fax reception is
still possible. When a fax is received, the machine prints it out then returns to
Energy Saver mode.
• In Energy Saver mode, the operation panel display goes blank. However, if a
message is received using Substitute Reception or Confidential Reception, an
indicator will light to inform you. If the Substitute Reception indicator or
Confidential Reception indicator is lit or flashing, exit Energy Saver mode
and take appropriate action.
Limitation
The machine switches to Low Power Standby mode as long as the following
apply:
• Low Power Standby mode is turned on
• The machine is not being used
• The heater temperature is low
Warm-up
High Temper-
Time To Be
ature Standby
Ready To Print
Mode
Within about
You can switch
55 seconds
this on or off
Within about
You can switch
45 seconds
this on or off
Handy Functions
Power Con-
sumption
*1
*3
2.0W
45W
1
*2
25
Advertisement
Table of Contents
