If you make a mistake, press the
{Clear} key and try again.
If a password is already stored,
enter the password.
G
Press [OK].
H
Press [Name].
I
Enter the name of the box.
Note
To change a previously stored
name, press the {Clear} key then
enter a new one.
Reference
P.303 "Entering and Modifying
Text"
J
Press [OK].
K
Press [Password].
Note
If you do not wish to register a
password, go to step N.
L
Enter the password you wish to
store.
Note
You can enter up to 20 charac-
ters which can be digits 0-9, "#",
"*" and spaces (the first charac-
ter cannot be a space).
If you make a mistake, press the
{Clear} key and try again.
M
Press [OK].
N
Press [OK].
O
Press [PrevMenu] three times.
P
Press [Exit] to return to the stand-
by mode.
Deleting Information Boxes
This section describes how to delete
Information Boxes.
Limitation
If the specified SEP Code is not
registered as an Information Box
or the messages of the box are reg-
istered, you cannot delete it.
Box Settings
9
295