Display Hierarchy And Menu Mode - Veikong VFD500 Series User Manual

Chapter 4 Operation and display
9
10
11
12
13
14
15
16
17

4.2 Display hierarchy and menu mode

VFD500 digital keyboard display is divided into four layers, from top to bottom are: monitoring status, menu
mode selection status, function code selection status, parameter editing / viewing status, as shown in Figure 4-2. In
the menu mode selection status, press 【UP】 or 【DOWN】 key to select menu mode, press 【ENTER】 to enter
the selected menu mode, the following describes several menu modes:
MONITO
R
STATUS
Monitoring volume1
ESC
MENU
CHOOSE
STATE
Standard mode
ESC
COMMAND
CODE
【UP、DOWN、SHIFT】
ESC
PARAMETER
EDIT/VIEW
STATUS
【UP、DOWN、SHIFT】
 Standard mode（-bSC-）
If visiting access (r00.01) is standard, all the function codes mentioned in this manual are accessible.
VFD500 high performance vector control frequency inverter user manual
Indicator light:Hz
·Indicate the digital display unit, all three lights off means other
Indicator light:A
units
Indicator light:V
Indicator
When Hz" and "A" are lit at the same time, the unit of the currently
light:HZ+A(rpm/min
displayed parameter is "RPM PER MINUTE
ute)
Indicator When "A" and "V" are lit at the same time, the unit of the currently
light:A+V(%) displayed parameter is "percent".
• Off: indicates a stop condition.
Running lights • On: indicates inverter is running.·
Blinking: Deceleration stopped.
• Used to indicate the sign of the variable when the LED is
Direction indicator displaying one of the variables listed in 27.02;
• In other cases the sign of the output frequency is indicated.
• Off: The command source is the keyboard.
Command source
• On: The command source is terminal.
indicator
• Blinking: The command source is communication.
Fault indicator • When it is on, the drive is faulty.
SHIF
T
Monitoring volume2
UP
DOWN
User-difined mode
ENTER ESC
【UP、DOWN】
ENTER ESC ENTER
【UP、DOWN、SHIFT】
4-2Keyboard operation diagram
SHIF
T
Monitoring volume3
UP
DOWN
Check mode
ENTER ESC ENTER
【UP、DOWN】
ESC ENTER
【UP、DOWN、SHIFT】
- 35-
SHIF SHIF
Monitoring
T T
Monitoring volume4
UP UP
"-bSC-
DOWN
DOWN
Wizard mode
ESC ENTER
【UP、DOWN】
ESC ENTER
【UP、DOWN、SHIFT】
volume1
"