Veikong VFD500 Series User Manual page 175

VFD500 high performance vector control frequency inverter user manual Appendix B Profinet communication card usage
by PZD1 (master->slave) will be written
When writing to QW202, the corresponding value of the drive communication address mapped
by PZD2 (master->slave) will be written
When QW204 is written, the corresponding value of the drive communication address mapped
by PZD3 (master->slave) will be written.
When IW200 is read, the value read by the drive address mapped by PZD1 (slave->master)
is read
When IW 2 0 2 is read, the value read by the drive address mapped by PZD 2 (slave->master)
is read
When reading IW204, the value read by the drive address mapped by PZD3 (slave->master)
is read. The rest and so on.
For example, if the previous PZD3 (master->slave) is set to 301, the value stored in QW204
will be written to function code P03.01.
PZD3 (slave->master) is set to 2702, and the value read from function code P2702 is stored
in IW204.
（8）When the configuration is set, click Generate.
6.4 Download the configuration program and configure the name and IP address of the
device.
（1）Download the generated configuration program to PLC
- 173-