Veikong VFD500 Series User Manual page 173

VFD500 high performance vector control frequency inverter user manual Appendix B Profinet communication card usage
（6）Select the appropriate IO module, take this time as an example, choose the Standard
telegram 3 module. To facilitate setting the start address of PNI and PNQ to 200. The
following instructions are based on 200.
PZDx (master->slave) indicates the corresponding address written by the master to the slave.
PZDx (slave->master) indicates that the master reads the corresponding address of the slave.
Depending on the configured module, up toPZD 3~PZD12 can be set. The PZD input range
is 0~65535. (Note: V2.9 version drive, 0x7000 groups map to 29 groups).
PZD 1 (master->slave) and PZD2 (master->slave) default to 29 00 and 2901
PZD1{slave->master}, PZD 2 (slave->master) defaults to 2700 and 2701 masters cannot be
- 171-