Veikong VFD500 Series User Manual page 42

Chapter 5 Function code
Function
Parameter name
code
P00.05 Running mode
Source of the
P00.06
Operation Command
Numeric frequency
P00.07
setting
P00.08 Rotation direction
P00.09 Reverse control
P00.10 Motor option
P00.11 Special industry
Power board software
r00.18
version
Control board software
r00.19
version
r00.21 SN 1
r00.22 SN 2
VFD500 high performance vector control frequency inverter user manual
Description
0：Speed mode
1：Torque mode
If use with DI function,19:Switch between

torque and speed Control and 20: torque
control disabled. Actual effective running
mode is related with DI status
0：keypad
1：terminal
2：communication
Command source: run、stop、forward、

reverse、jog、fast brake stop.etc
If use with DI function, 12：Switching run

command to Keypad and 13：Switching
run command to Communication, Actual
effective command source is related with
DI status
00.00Hz～maximum frequency(Set P21.17=1
to change the unit to 1Rpm)
0：Forward
1：Reverse
It is only for keypad control to change

running direction by giving frequency
symbol to be reverse)If command by
keypad/terminal /communication, and not
want to achieve reverse running by
giving frequency symbol to be reverse,
need to change P22.13 in stop mode(see
parameter P22.13)
0：enable
1：disable
0：motor 1
1：motor 2
If use with DI function,16:Switch between
motor 1 and motor 2,Actual effective
command source is related with DI status
0：standard drive
1：Reserved
-
-
-
-
- 40-
Default Property
0
★
0
★
50.00Hz
☆
0
☆
0
★
0
★
0
★
- ●
- ●
- ●
- ●