VFD500 high performance vector control frequency inverter user manual
◆ SIZE D-G(18.5KW-90KW) Removal and installation of cover:
Removal steps
○
2
○
1
① Unscrew the two screws at the bottom of the
bottom cover
② Remove the cover vertically
◆SIZEH~SIZE I( 110KW-160KW) Removal and installation of cover
①Unscrew the two screws at the bottom of the cover
○
1
Installation steps
Chapter3 Product appearance and wiring
Installation steps
○
1
○
2
① Close the cover vertically
② Tighten the two screws on the bottom of the cover
②Hold both sides of the cover with both hands and
lift the lower part of the cover
③Push up and lift the entire cover (be careful or
you will snap the keyboard cable)
- 19-
○
2