P7 Keyboard And Display - Veikong VFD200A Series Operation Manual

overvoltage fault.
P6-23 AVR function
0: No effect No AVR processing is carried out during the operation of the frequency converter
1: Only deceleration takes effect
The frequency converter is only AVR processed during deceleration
2: The whole process is valid
AVR processing is carried out during the operation of the frequency converter

P7 Keyboard and display

JOG/REV key
P7-01
function selection
JOG/REV The key is a multi-function key, and the function of the JOG/REV key can be set by this
function code. This key can be used to switch between stop and run.
0: This key has no function.
1: Keyboard command and remote operation switcher. Refers to the switching of the command source,
that is, the current command source and keyboard control (local operation) switching. If the current
command source is keyboard control, this key function is invalid.
2: Forward/reverse switching the direction of the frequency command is switched by the JOG/REV
button. This function is only available when the command source is the operator panel command channel.
3: Forward jog through the keyboard JOG / REV Key to achieve forward jog
4: Reverse jog through the keyboard JOG/REV key to achieve reverse jog
STOP/RESET key
P7-02
function selection
Chapter 6 Parameter Instruction
0: No effect
1: Only deceleration takes effect
2: The whole process is valid
0: F/R key is invalid
1:Switchover between operation panel control and
remote
command control (terminal or communication)
2: Switchover between forward rotation and reverse
rotation
3: Forward JOG
0: STOP/RESET key enabled only in operation panel
control
1: STOP/RESET key enabled in any operation mode
4: Reverse JOG
78
Default：2
Default：0
Default：1