Veikong VFD500 Series User Manual page 162

VFD500 high performance vector control frequency inverter user manual Appendix B Profinet communication card usage
(3) Select the network interface of the slave, right-click "Properties" > "General" - >
"Ethernet Address" to set the IP address and device name of the slave
(4) Set the IP address and subnet mask of the slave (ensure that it is a network segment
with the master P LC) and do not check automatically generate the device name, fill in the
automatically generated name in the drive, such as mtpn-1 (the name must be consistent
with the drive), and configure other drives in turn.
- 160-