Veikong VFD500 Series User Manual page 124

Chapter 5 Function code
Function
Parameter name
code
P45.14 Counter 2 control
Count 1/2 overflow action: when counter higher than maximum value as following chart
Maximum
setting
0 1
Counter
value
Pulse input
P58.00 Fire mode function
Running Frequency of
P58.01
Fire Mode
No-warranty mark of
r58.02
fire mode
Fire Mode
P58.03
freq. channel
VFD500 high performance vector control frequency inverter user manual
Unit's digit: counting method
0: Stop counting after counting the
maximum value
1: Reset after counting the maximum
value, recount from 0
Ten's digit: the action after the counter
reaches the set value
0: continue to run
1: Free stop
2: Ramp to stop
3: Emergency stop
Hundred's digit : Power-down save option
0: Do not save the count value when power
is off
1: save the count value when power is off
6
4 5
2 3
Stop counting
58 Group Fire Mode
0：Invalid
Fire mode is invalid, the inverter operates
in normal mode.
1：Fire mode 1
In fire condition, all fault detections are
masked ， the
continuously until it is damaged.
2：Fire mode 2
OC, OV fault detect and protect, other
faults shielded.
Set the operating frequency in the fire mode.
When the continuous running time under fire
mode exceeds P58.04, this flag will be set
to 1, and the VFD is out of warranty. The
keyboard shows A. FirE.
0 ： Fire mode running frequency set in
running P58.01.
1：Fire mode running frequency same to
setting in P01.00~P01.05.
- 122-
Description
4 5
2 3
0 1
C o n t i n u e c o u n t i n g
after overflowing
inverter will operate
Default Property
100
☆
6
4
2 3
0 1
0 RR
50.00Hz RW
0 RO
0 RW