Veikong VFD500 Series User Manual page 166

VFD500 high performance vector control frequency inverter user manual Appendix B Profinet communication card usage
and IW4 stores the value read to the address mapped to PZD3 (slave->master).
For example, if the previous PZD3 (master->slave) is set to 301, the value stored in QW4 will
be written to function code P03.01.
If PZD3 (slave->master) is set to 2 702, the value read from function code P2702 is stored in
IW4.
5.6 Assign a device name
(1) Right-click the device in the configuration and select "Assign device name"
(2) Connect the PLC and the drive with a network cable, In the pop-up interface, click the update
list below to update the Profinet slaves connected to the network, select the slave you want to
assign a name, and click the "Assign Name" button below
- 164-