VFD500 high performance vector control frequency inverter user manual Appendix B Profinet communication card usage
2.Click the Add button to add the device to the configuration;
3.Assign an IP address to the configuration device, if the I P address has been set in the
drive, please use the fixed IP (refer to the figure below), if not used, double-click in the blank
space of the interface I P address to fill in the corresponding P address.
(Note: If the IP
address is blank, click Fixed IP first, and then select the user
IP).
(4) To modify the device name, it must be consistent with the name inside the PN card,
otherwise it cannot communicate.
(5)Check the name and IP address of the configured device.
- 170-