Canon
L.
Puncher Unit-BS1
Inner puncher provides 2-hole and 3-hole punch capabilities for either the
•
Staple Finisher-W1 PRO or Saddle Finisher-W1 PRO.
Supports 2-hole punch for LGL and LTRR paper.
•
Supports 3-hole punch for 11" x 17", LTR and EXEC.
•
M.
Puncher Unit-BF1
Inner puncher provides 2-hole and 3-hole punch capabilities for either the
•
Staple Finisher-X1 or Booklet Finisher-X1.
Supports 2-hole punch for LGL and LTRR paper.
•
Supports 3-hole punch for 11" x 17", LTR and EXEC.
•
N.
2/3 Hole Puncher Unit-A1
Inner puncher provides 2-hole and 3-hole punch capabilities.
•
•
Supports paper sizes up to 11" x 17".
Supports paper weights up to 140 lb Index (256 g/m
•
Requires the Staple Finisher-AC1 or the Booklet Finisher-AC1.
•
Supports the imageRUNNER ADVANCE DX 8786i.
•
O.
Booklet Trimmer-F1/-G1
Provides adjustable front trimming of saddle-stitched booklets of up to
•
25-sheets (approximately 100 pages).
The Conveyor Tray can hold approximately 30 booklets.
•
Connects to the Booklet Tray of the Booklet Finisher-W1 PRO.
•
•
Booklet Trimmer-F1 no longer available (replaced by Booklet Trimmer-G1).
P.
Inner Booklet Trimmer-A1
•
Inner Booklet Trimmer provides front trimming to the Booklet Finisher-X1.
•
Supports adjustable front side trimming of up to 40 sheets.
Connects to the Booklet Finisher-X1.
•
The Booklet Tray can hold approximately 25 booklets.
•
Q.
Document Insertion Unit-N1
Inserts pre-printed cover sheets or insertion sheets for binding.
•
The upper paper feed tray and lower paper feed tray have a capacity of up
•
to 200 sheets each (total 400 sheets) (20 lb bond (80 g/m
Supports paper weights up to 140 lb Index (256 g/m
•
•
Requires the Staple Finisher-X1, Booklet Finisher-X1, Staple Finisher-W1
PRO or Booklet Finisher-W1 PRO.
imageRUNNER ADVANCE DX 8700 Series Service Guide
Revision 7
imageRUNNER ADVANCE DX 8700 Series Service Guide
2
).
2
)).
).
2
March 2023
Page 15