Relocating The Machine - Canon GP335 Service Manual

III. RELOCATING THE MACHINE
If the machine needs to be relocated after installation by truck or other means of transportation,
perform the following:
1. Points to Note
If the machine is moved while placed on the pedestal over a distance (e.g., from room to room),
holding the machine by its grips can separate it from the pedestal. Avoid the grips, and be sure to lift
the pedestal.
2. Preparing for Relocation
No.
1 Take out the drum unit.
2 Fix the scanner in place.
3 Tape the charging assemblies and the
feeding assembly levers in place to protect
against vibration.
4 Tape the front door, delivery assembly, and
cassette in place.
5 Place an A3 sheet of copy paper on the
copyboard glass, and tape the copyboard
cover (feeder) in place.
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Work
CHAPTER 12 INSTALLATION
Remarks
Put the drum unit in a separate box
for transportation.
Remarks
12-27