Call Transfer (Ct)-By Qsig - Panasonic KX-NCP500 Features Manual

1.30.4.4 Call Transfer (CT)—by QSIG
Description
The PBX transfers the call to a destination extension in another PBX in QSIG network.
If the same trunk group is used for the incoming call and the transferred call, the following situation will be
possible.
[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
•
This feature complies with European Telecommunication Standard (ETS) specification ETS 300 261, Call
transfer supplementary service.
•
This feature can be enabled or disabled on an ISDN (QSIG) port basis.
•
Call Transfer with Announcement and Call Transfer without Announcement is possible (® 1.12.1 Call
Transfer).
PC Programming Manual References
3.33 [1-1] Slot—Port Property - BRI Port—Supplementary Service—
CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
QSIG
PBX-2
1
Call to 2000
2 Transferred
to 1001
Extn. 2000
QSIG
PBX-2
Extn. 2000
1.30.4 QSIG Standard Features
Extension 1000 of PBX-1 dials
1
extension number "2000", and the call
is sent to extension "2000" of PBX-2
through QSIG network.
The call is transferred from extension
2
2000 to extension "1001" of PBX-1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the transfer destination of
extension 2000.
COLP, CLIR, COLR, CNIP, CONP,
Feature Guide 383