Automatic Callback Busy (Camp-On) - Panasonic KX-NS1000 Feature Manual

2.1.4 Automatic Callback Busy (Camp-on)

ARS routing takes place after the preprogrammed number of digits (leading number + additional number
of digits) have been dialed.
PC Programming Manual References
6.5 Tool—Import
→ARS - Leading Digit
→ARS - Except Code
→ARS - Routing Plan
6.6 Tool—Export
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Inter-digit
10.9 PBX Configuration—[2-9] System—System Options—Option 3—
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
Itemized Code
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1—
Itemized Code
14.3 PBX Configuration—[6-3] Feature—Verification Code—
Section 16 PBX Configuration—[8] ARS
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—
Feature Manual References
23.1 Capacity of System Resources
2.1.4 Automatic Callback Busy (Camp-on)
Description
If the line is busy when a call is made, a callback ring can inform the caller when the line becomes free.
If the called party was another extension, or if the dialed number is handled by Automatic Route Selection
(ARS), the number is automatically redialed after the extension user answers the callback ring.
Conditions
•
If the callback ring is not answered within 10 seconds, callback is canceled.
•
If the extension hears a busy tone before dialing the telephone number, only the CO line or trunk group is
reserved. After answering the callback ring, the extension should dial the telephone number.
•
An extension can set only one Automatic Callback Busy. The last setting is effective.
•
Multiple extension users can set this feature for the same CO line at the same time.
However, a maximum of four extension users can set this feature to one extension.
Callback ringing will be sent to extensions in the order that the feature was set. In other words, the extension
that set the feature first will receive a callback ringing first.
•
This feature cannot be used for calls to a VPS, the Unified Messaging system, or a SIP extension (including
KX-UT series).
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Cancel
28 Feature Manual
Dial Tone—Dial Tone for ARS
Itemized Billing Code for ARS
Option—ARS Dial
Automatic Callback Busy
Document Version 2016-03
Dial—Extension
ARS
ARS