Call Forwarding (Cf)-By Qsig - Panasonic KX-TDA30 Features Manual

1.29.3.3 Call Forwarding (CF)—by QSIG
Description
The PBX forwards the call to a destination extension in another PBX in QSIG network. The destination can
be set on your own PBX on an extension basis as the forward destination of trunk calls (→ 1.3.1.2 Call
Forwarding (FWD)).
This feature complies with the following European Telecommunication Standard (ETS) specifications: ETS
300 257 Diversion supplementary services.
If the same trunk group is used for the incoming call and the forwarded call, the following situation will be
possible.
[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
• This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX.
QSIG
PBX-2
1 Call to 2000
2 Forwarded
to 1001
Extn. 2000
(Forward Destination
of Trunk Calls: 1001)
QSIG
Extn. 2000
Extension 1000 of PBX-1 dials extension
1
number "2000", and the call is sent to
extension "2000" of PBX-2 through QSIG
network.
The call is forwarded to the forward
2
destination of trunk calls of extension
2000, which is extension "1001" of PBX-
1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the forward destination of
extension 2000.
PBX-2
1.29 Networking Features
Feature Guide 283