Appendix 10Added And Enhanced Functions - Mitsubishi Electric MELSEC iQ-R Series User Manual

Appendix 10
The following table lists the added and enhanced functions in the RJ71GN11-T2.
Added and enhanced functions
Updated the firmware using the engineering tool
Multicast function to the communication mode under the application settings
Communication speed of 100Mbps
TSN hub
CC-Link IE TSN network synchronous communication function
Safety communications in a system using the Safety CPU
Station information list
Loopback function
Remote device test
Ring topology
CANopen communications
Watchdog counter
Increase in the number of inter-module synchronization target modules
CC-Link IE TSN Communication Software
Restriction cancellation on CC-Link IE TSN Class A devices/Ethernet devices in multicast mode
Compatible with time-managed polling (protocol version 2.0)
Improvement of detection of connected/disconnected devices function
Connection with a CC-Link IE TSN Class A device that supports the CANopen profile with the protocol
version 2.0
Co-recording
*1 For details on firmware update, refer to the following.
 MELSEC iQ-R Module Configuration Manual
*2 There are restrictions on the CPU module to be used. For details, refer to the following.
 MELSEC iQ-R CPU Module User's Manual (Application)
APPX
320
Appendix 10 Added and Enhanced Functions
Added and Enhanced Functions
*1
*2
*2
Firmware version
"01" or later
"04" or later
"04" or later
"05" or later
"10" or later
"10" or later
"10" or later
"10" or later
"10" or later
"10" or later
"11" or later
"11" or later
"11" or later
"12" or later
"14" or later
"14" or later
"15" or later
"15" or later
"17" or later