Objet500 User Guide
To separate assemblies into individual objects (stl files):
1. Select the assembly (either on the build tray or in the model tree).
2. From the Object menu, select Ungroup.
Freezing Model Orientation
If you manipulate an object on the build tray, you can freeze its orientation so that
it does not change when you position it automatically (see "Automatic
Positioning" on page 5-30).
To freeze an object:
1. Select an object on the build tray.
2. On the Model Settings
To unfreeze an object:
➢ Select the object and click
DOC-07027 Rev. I
In the model tree, the elements are not parts of an assembly.
Figure 5-48 Separate objects in the model tree
Toolbar, click
.
ribbon, in the Manipulate group, or on the Model
(to de-select it).
5 Using Objet Studio
5-43