Table of Contents
Advertisement
Objet500 User Guide
16. A fter confirming all of the items listed in the wizard screen, click Next.
17. O pen the printer. Carefully remove the resin container from the scale and
Caution: The resin in the container is uncured
l
l
18. C lose the printer cover, confirm the items listed in the wizard screen, and click
19. W hen the following screen appears, open the printer and remove the scale.
20. C onfirm the items listed in the wizard screen, and click Next.
DOC-07027 Rev. I
Printing material (resin) is jetted from each head and its weight is
automatically recorded. Then, the following screen appears.
Figure 6-67 Emptying the resin container
empty it into the purge unit. Then return the container to the scale.
To prevent contact with skin, wear neoprene or nitrile gloves.
Dispose of uncured resin in accordance with applicable regulations. By
emptying the container into the purge unit, the resin is stored in the printer's
sealed waste container.
Next.
The printer cures the resin in the container.
Figure 6-68 Remove Scale confirmation screen
6 Operating and Maintaining the Printer
6-53
Advertisement
Table of Contents
