Table of Contents
Advertisement
Objet500 User Guide
Automatic Zoom
When Auto Zoom is selected in the Advanced section of the Options dialog box,
the display zooms in, to display the objects placed on the build tray. This allows
you to carefully inspect and manipulate the objects.
By default, this feature is not enabled. In any case, you can change the zoom
level, as necessary (see "Zoom Options" on page 5-52).
OpenGL Driver Configuration
The OpenGL driver displays 3D graphics on your screen. There is normally no
reason to adjust its settings. If you suspect a problem with the way Objet Studio
displays objects, you can use the OpenGL Driver Configuration tool to check and
configure the driver settings.
To access the OpenGL Driver Configuration dialog box:
1. From the Tools menu, select Options.
2. In the Options dialog box, display the Troubleshooting tab.
The Troubleshooting tab is only accessible when Professional Mode is active
(see "Professional Mode Features" on page 5-73).
DOC-07027 Rev. I
or—
In the Objet Studio Commands menu
Figure 5-93 Access to OpenGL Driver configuration
5 Using Objet Studio
, click Options.
5-75
Advertisement
Table of Contents
