Freezing Model Orientation - Stratasys Connex500 User Manual

Using Objet Studio
Freezing Model
Orientation
5–38
If you manipulate an object on the build tray, you can freeze its orientation
so that it does not change when you position it automatically (see
"Automatic Placement" on page 27).
To freeze an object:
1. Select an object on the build tray.
2. On the Model Settings ribbon, in the Manipulate group, or on the Model
Toolbar, click .
To unfreeze an object:
Select the object and click (to de‐select it).
DOC-13025 Rev. A