Freezing Model Orientation; Display Options; Viewing Objects - Stratasys Objet260 Connex User Manual

Using Objet Studio
Freezing Model
Orientation

Display Options

Viewing
Objects
5–38
To separate assemblies into individual objects (stl files):
1. Select the assembly (either on the build tray or in the model tree).
2. From the Object menu, select
In the model tree, the elements are not parts of an assembly.
Figure 5-49: Separate objects in the model tree
If you manipulate an object on the build tray, you can freeze its orientation
so that it does not change when you position it automatically (see
"Automatic Placement" on page 27).
To freeze an object:
1. Select an object on the build tray.
2. On the Model Settings ribbon, in the Manipulate group, or on the Model
Toolbar, click .
To unfreeze an object:
Select the object and click
From the View menu, you can change the way objects are displayed. The
default method for displaying models on the build tray is as solid
("shaded") objects.
Figure 5-50: Tray and model displayed in Shaded view
The other display options are WireFrame and Points.
.
Ungroup
(to de‐select it).
DOC-33040 Rev. A