Table of Contents
Advertisement
Objet500 User Guide
until the print job is completed. When one cartridge empties and the other one
is being used, you can replace the empty cartridge with a new one.
7. For Support material, select Both if you need to load two replacement
8. In the Flushing cycle section of the wizard screen, choose how thoroughly
There are additional settings that you can select for special purposes (see
"Advanced Settings"). If necessary, click Advanced Settings before clicking
Next.
DOC-07027 Rev. I
cartridges.
you want to flush out material currently in the system:
❒ Economy. This cycle can be used when replacing a light-colored Model
material with a darker material (such as Agilus30 Black™ or
VeroBlack™) or if the exact color of the printed models is unimportant.
Use this cycle when replacing cleaning fluid with any Model material.
The wizard flushes the system with the minimum amount of material
needed to ensure that models have the mechanical properties of the new
material.
❒ Full. Use this cycle when the printed models must have the exact color of
the new material.
The wizard thoroughly flushes t he feed tubes and print heads needed for
printing, based on your selections in the previous screens.
6 Operating and Maintaining the Printer
6-15
Advertisement
Table of Contents
