Table of Contents
Advertisement
Objet500 User Guide
To use polygon reduction:
1. From the Tools menu, select Options.
2. In the Options dialog box, display the
3. Select Enable Polygon Reduction .
4. Select Polygon Reduction (Percent).
5. Enter the percentage of total polygons to display.
6. Set display options when the object is being moved (Display while changing
DOC-07027 Rev. I
Figure 5-63 Object displayed with only five percent of its polygons
showing
or—
From the Objet Studio Commands menu
Figure 5-64 Options dialog box, Display tab
When you click Apply, the display changes.
Note: The setting affects the static display (when the object is not being
moved).
view):
5 Using Objet Studio
, click Options.
tab.
Display
5-51
Advertisement
Table of Contents
