Table of Contents
Advertisement
Objet500 User Guide
Printing With Bio-Materials
To ensure the bio-compatibility of printed parts when changing from standard
printing materials to bio-compatible materials, follow the instructions for loading
the relevant material. To download the required document, search for
"Biocompatibility Requirements" on the Stratasys Support Center.
Advanced Settings
The Advanced Settings dialog box enables you to configure the Material
Replacement wizard for special purposes. If necessary, click Advanced
Settings in the Material Replacement Options screen before clicking Next.
Positioning
By default, Automatic slot selection determines the best slot locations for the
cartridges in the material cabinet, based on materials currently in the system.
This ensures minimum flushing of materials currently loaded.
Select Manual slot selection—
• if there is a special need to load cartridges in certain slot locations.
• if you only want to change one of the cartridges for a given material channel.
Some materials cannot replace certain other materials. If you attempt to do
so, the wizard notifies you.
To select the slots for the cartridges manually:
1. In the Material Replacement Options screen, click Advanced Settings.
DOC-07027 Rev. I
Figure 6-13 Advanced Replacement settings
6 Operating and Maintaining the Printer
6-18
Advertisement
Table of Contents
