Table of Contents
Advertisement
Objet500 User Guide
9. Remove the UV lamp bulb from the UV reflector.
10. B efore continuing, inspect the spring-loaded pins. If there are burn marks
DOC-07027 Rev. I
Figure 6-115 Removing the U V lamp bulb
around the pins or if the pins are loose—their springs are not functioning
properly—and do not support the bulb, continue with step
UV reflector.
Otherwise, continue with step 8 to replace the UV bulb.
Figure 6-116 Spring-loaded pin
6 Operating and Maintaining the Printer
, to replace the
15
6-78
Advertisement
Table of Contents
