Objet500 User Guide
Continue Here
➢ To cancel the Build command so you can correct the problem, click No.
➢ To print the models as they are positioned on the tray, click Yes.
DOC-07027 Rev. I
If the build tray file has not been saved when you click Build, the Save As
dialog box opens for you to save it.
Objet Studio checks if there is a problem with the positioning of objects on the
tray. If so, the affected objects are displayed with special colors (see "Tray
Validation" on page 5-54), and a warning message appears.
Figure 5-73 Tray validation warning message
The Job Manager screen opens, so you can monitor the progress of your
trays—before, during, and after printing. See "Monitoring and Managing Print
Jobs" on page 5-80.
5 Using Objet Studio
5-60