Table of Contents
Advertisement
Objet500 User Guide
6. Loosen the screw securing the UV lamp cover (A), and pull the cover up (B),
7. Pull the UV reflector out of the print block.
8. Using a 2.5-mm hex key, remove the UV lamp clamp (2 screws).
DOC-07027 Rev. I
then out (C).
Figure 6-112 Removing the UV lamp cover
Figure 6-113 Removing the UV lamp reflector
Figure 6-114 Removing the UV lamp clamp
6 Operating and Maintaining the Printer
6-77
Advertisement
Table of Contents
