Objet500 User Guide
To disconnect Objet Studio from the printer:
1. On the Job Manager ribbon, in the 3D Printer group, click
2. In the Set Printer Features dialog box, click Connect (see Figure 5-102 on
3. In the Printer Connection dialog box, delete the computer name/IP address.
4. Click OK.
5. Click OK.
DOC-07027 Rev. I
page 5-83).
Figure 5-104 Disconnecting Objet Studio from a printer (A)
Figure 5-105 Disconnecting Objet Studio from a printer (B)
"Unknown" appears in the printer-name field.
5 Using Objet Studio
.
5-85