Table of Contents
Advertisement
Objet500 User Guide
If there is a maintenance task due, this is indicated on the main interface screen.
Figure 6-23 Maintenance Required indicator
If this indicator appears, you can display the Maintenance Counters screen by
clicking on it.
Figure 6-24 Maintenance Counters screen
The Maintenance Required indicator appears by default for most operator-
performed maintenance tasks. The check box under "User Warning" controls
whether or not it appears when a particular task is due.
For maintenance tasks that are controlled by wizards, the dates and printing
times are reset automatically when the relevant wizard is run and completed
successfully. Manual maintenance tasks (for example, roller inspection and wiper
replacement) are reset by clicking the reset button in the Maintenance Counters
screen.
DOC-07027 Rev. I
6 Operating and Maintaining the Printer
6-28
Advertisement
Table of Contents
