Table of Contents
Advertisement
Objet500 User Guide
13. I n the final wizard screen, click Done.
14. I nspect the area around the purge unit and clean it, if necessary.
After changing the type of Support material (SUP705/706), you need to run
the Head Optimization wizard before printing models. See "Optimizing
(Calibrating) Print Heads" on page 6-47 .
DOC-07027 Rev. I
Figure 6-12 Final wizard screen
The printer-control application is automatically updated, and it restarts.
When it opens, the interface displays the new material(s). Objet Studio (on
the server computer) is also updated and displays the new material(s).
The interface in the job preparation application i s also updated, and it
displays the new material(s).
6 Operating and Maintaining the Printer
6-17
Advertisement
Table of Contents
