Table of Contents
Advertisement
Objet500 User Guide
9. Clean the orifice plates, with a back-and-forth motion (see Figure 6-28). Use
10. C lean the entire roller surface, by rotating it as you clean.
Use this opportunity to clean the glass lens on the UV lamps using the
supplied sanding sponge.
11. W hen you have finished cleaning, select the confirmation check box in the
12. R emove the cleaning materials from the printer and close the cover.
13. S elect the confirmation check boxes in the wizard screen and click Next.
DOC-07027 Rev. I
the mirror to make sure that you have removed all of the residue material.
Figure 6-28 C leaning the heads
wizard screen (see Figure 6-27) and click Next.
The head-purge cycle begins. When the process is complete, click Done in
the final wizard screen.
Figure 6-29 Final wizard screen
6 Operating and Maintaining the Printer
6-31
Advertisement
Table of Contents
