Objet500 User Guide
20. W ith your fingers, make sure that the new head is level and even with the
21. C onfirm that the heads are level by selecting the check box in the following
22. I n the next wizard screen, confirm that you have removed all tools and objects
DOC-07027 Rev. I
other heads.
Figure 6-85 Checking the level of the new head
wizard screen, and click Next.
Figure 6-86 Installation-check screen
from the printer.
Figure 6-87 Cleared-tray confirmation screen
6 Operating and Maintaining the Printer
6-63