Freezing Model Orientation - Stratasys Objet30 User Manual

Freezing Model
Orientation
DOC-24333 Rev. A
To cancel plane selection after re-aligning objects on the build tray:
On the Tray Settings or Model Settings ribbon, click
or—
From the Tools menu, select
To flip an object 180 degrees on any axis:
1. Select the object.
2. From the Object menu, select
To make precise changes to the object's orientation on any axis:
1. Select the object.
2. Display the Transform dialog box (see figure 5‐31 on page 27).
3. Change the
Rotate
If you manipulate an object on the build tray, you can freeze its orientation
so that it does not change when you position it automatically (see
"Automatic Placement" on page 5‐19).
To freeze an object:
1. Select an object on the build tray.
2. On the Model Settings ribbon, in the Manipulate group, or on the Model
Toolbar, click .
To unfreeze an object:
Select the object and click
Plane Alignment > Select Plane
Flip > Flip X / Flip Y / Flip Z
parameters for each axis.
(to de‐select it).
Objet30 User Guide
.
.
.
5–29