Table of Contents
Advertisement
Objet500 User Guide
4. Thoroughly wet the surface with the cloth. Do not wipe!
5. Rinse the cloth with clean water.
6. Absorb the solution from the acrylic surface with the cloth, without applying
7. If necessary, repeat to remove any remaining marks, or apply clean water to
8. If the surface is still wet, you can dry it with a clean, micro-fiber cloth by gently
If convenient, you can apply the cleaning solution and water to the acrylic
surfaces with a spray bottle instead of with the cloth.
DOC-07027 Rev. I
Do not use paper towels, which can cause scratch marks.
pressure.
rinse the surface.
wiping in one direction.
6 Operating and Maintaining the Printer
6-93
Advertisement
Table of Contents
