Freezing Model Orientation - Stratasys Objet24 User Manual

Using Objet Studio
Freezing Model
Orientation
5–28
To cancel plane selection after re-aligning objects on the build tray:
On the Tray Settings or Model Settings ribbon, click
or—
From the Tools menu, select
To flip an object 180 degrees on any axis:
1. Select the object.
2. From the Object menu, select
To make precise changes to the object's orientation on any axis:
1. Select the object.
2. Display the Transform dialog box (see figure 5‐30 on page 26).
3. Change the parameters for each axis.
Rotate
If you manipulate an object on the build tray, you can freeze its orientation
so that it does not change when you position it automatically (see
"Automatic Placement" on page 19).
To freeze an object:
1. Select an object on the build tray.
2. On the Model Settings ribbon, in the Manipulate group, or on the Model
Toolbar, click .
To unfreeze an object:
Select the object and click
Plane Alignment > Select Plane
Flip > Flip X / Flip Y / Flip Z
(to de‐select it).
.
.
.
DOC-34014 Rev. C