Table of Contents
Advertisement
Objet500 User Guide
3. Follow the instructions on the wizard screens, and select the confirmation
4. Click Next.
5. When the following screen appears, open the cover.
Warning: Hot Surface
The print head orifice plates (bottom surface) may be hot. Do not touch them
with your bare hands, and proceed with caution.
6. Place the mirror on the build tray.
7. Put on the gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
8. Soak the cleaning cloth with alcohol.
DOC-07027 Rev. I
check boxes.
Figure 6-26 Tray and cover confirmation
The printer prepares for you to clean the print heads.
Figure 6-27 Head cleaning wizard—steps 5–11
6 Operating and Maintaining the Printer
6-30
Advertisement
Table of Contents
