Objet500 User Guide
2. After the printer-control computer boots, log in to Windows and launch the
A HASP plug containing a valid product activation key is required on the
printer computer. This is supplied during printer installation or upgrade. If the
application does not open and a HASP message appears, contact your
Stratasys dealer or service provider.
All monitoring and controlling of the printer is done from this interface.
Figure 6-3 Printer interface
Objet500 installations use one monitor for displaying both the computer
running Objet Studio and the computer installed inside the printer. Make sure
that the KVM (keyboard-video-mouse) switch is in the correct position so that
the printer interface is displayed.
DOC-07027 Rev. I
printer-control program:
❒ On the printer-computer desktop, double-click the Objet500 printer icon.
or—
❒ From the Windows Start menu, select (All) Programs > Objet >
Objet500.
6 Operating and Maintaining the Printer
6-4