Table of Contents
Advertisement
Objet500 User Guide
3. Enter the computer name or its IP address, or click Browse to find and select
4. Click OK.
If you can see the material levels in the "Job Manager Screen" (see Figure 5-
101 on page 5-81), Objet Studio is connected to the printer.
Note: A printer can be listed by its name or by its computer's I P address.
Offline Mode
You can use Objet Studio to prepare trays for printing in offline mode, on a
remote computer or when the printer connection is not available. You also use
offline mode to prepare trays for printing with other printers. In this case, if Objet
Studio is currently connected to a printer, you must change to offline mode by
removing this connection.
DOC-07027 Rev. I
it.
Figure 5-103 Connecting to a printer (B)
When the connection is established, Objet Studio is configured to prepare
print jobs for that printer.
5 Using Objet Studio
5-84
Advertisement
Table of Contents
