Table of Contents
Advertisement
Objet500 User Guide
5. In the job-preparation application, make sure that the correct slice number is
6. If, for any reason, the correct number does not appear in the dialog box, enter
You cannot continue printing the model if:
• The number of the last slice printed does not appear in the printer interface,
• There was a relatively long interruption in printing, even if the "last slice" and
DOC-07027 Rev. I
entered in the d ialog box.
Figure 6-6 Slice confirmation in Objet Studio
Figure 6-7 Slice confirmation in GrabCAD Print
Figure 6-8 Printer interface after interrupted printing
the number and click OK.
even if the server computer displays the Continue from Slice confirmation
dialog box.
"continue from slice" indicators are correct. This is because the part already
6 Operating and Maintaining the Printer
6-11
Advertisement
Table of Contents
