Objet500 User Guide
If you cannot continue printing:
1. Cancel the job in the printing application (Objet Studio or GrabCAD Print).
2. Remove the partially printed model from the build tray.
3. Restart the job from the Job Manager screen (in Objet Studio).
4. Resend the job to the printer from the printing application.
You can stop p rinting from the printer interface or from the printing application
(Objet Studio or GrabCAD Print).
• After clicking the Stop button in the printing application, you can resume
printing from the printing application or from the printer interface.
• After clicking the Stop button on the printer interface, you can resume
printing only from the printing application.
• After clicking the Pause button in the printer interface, you can resume
printing only from the printer interface.
DOC-07027 Rev. I
printed might slightly deform or shrink before printing continues, causing a
visible difference between it and the part of the model printed later. The
effects of a printing stoppage depend on the model size and structure, the
Model material used, ambient temperature and the length of the stoppage.
In GrabCAD Print, you do this from the Schedule screen:
❒ Right-click on the job to display the pop-up menu, and select Cancel job.
OR—
❒ Left-click on the job to display the Job Status details, and click the Cancel
icon
.
❒ In Objet Studio, click
❒ In GrabCAD Print, click
6 Operating and Maintaining the Printer
.
.
6-12