Table of Contents
Advertisement
Objet500 User Guide
STL file loading preference
If there are identically named stl files in more than one location, you need to
ensure that the correct component stl files are linked to the objtf file. For example,
if there are identically named stl files on one drive and on a flash drive (this can
occur if you copy the original files to a working folder), you can set the default
location from which files are loaded.
To set the Load Order:
1. From the Tools menu, select Options.
2. In the Options dialog box, display the Settings tab.
3. Under Load Search Order, select an option:
4. Click OK.
DOC-07027 Rev. I
or—
In the Objet Studio Commands menu
Figure 5-14 Options dialog box, Settings tab
❒ Local—to load files from the location where they were last saved.
❒ Original—to load files in their original location.
5 Using Objet Studio
, click Options.
5-17
Advertisement
Table of Contents
